Renovation

Discussion in 'Subfloor Preparation' started by TonyA, Jul 10, 2013.

  1. TonyA

    TonyA Well-Known Member

    327
    118
    43
    Mapei Renovation vs Balls 700 opinions please & do you prime ,screed ,prime then lvt.
     
  2. bournemouth

    bournemouth Super Moderator

    2,015
    766
    113
    Never used renovation so cant compare but as for method prine screed prime glue I always prime before glue due to 700 being dusty
     
  3. Cre8tiveflooring

    Cre8tiveflooring Well-Known Member

    880
    566
    93
    Used both. 700 is a better product IMO but too much money compared to others out there. Renovation is good, not as quick drying but I always leave a day between fibre screeding and fitting on them. I prime on all screeds before glueing.
     
  4. dazlight

    dazlight Super Moderator

    7,216
    1,709
    113
    Been using level flex this last year, great price and a good screed.
     
  5. Cre8tiveflooring

    Cre8tiveflooring Well-Known Member

    880
    566
    93
    Can't get level flex near me, unless Mario know otherwise??
     
  6. mjfl

    mjfl Well-Known Member

    6,259
    1,593
    113
    I'll make a phone call in the morning
     
  7. Cre8tiveflooring

    Cre8tiveflooring Well-Known Member

    880
    566
    93
    Cool. I'll have a chat about it fri @ Floorskills?
     
  8. Spacey

    Spacey Super Moderator Staff Member

    6,503
    1,881
    113
    Same as Daz I've been using level flex its Super cheap & decent gear ! 700 is the best but a rip off & renovation is crap IMO !

    Prime, screed & then polish with my rotary machine & a sanding disc then glue ! This gives a better surface to stick to especially on dusty screeds.
    I even polish feather finishon ply unless its a small area because its dusty to.
     
  9. Spacey

    Spacey Super Moderator Staff Member

    6,503
    1,881
    113
    Have you tried a ceramic tile wholesaler's ? It made by tile master (I think) who make grout & tile adhesive !
     

Share This Page