Uzin will probably be your best bet. Everything they make grabs
If the screed is exceptional and your not fussy about the finish you may be able to sand the top and use a gypsum based micro finish over it all...
You can coat them with a sealer. You would need to check with the vinyl tile manufacturer if they recommend any products first then contact a...
8mm is standard thickness. Will be fine as long as your subfloor is flat
I wouldn’t want to test it! Put down some hardboard or ply or use a skate/barrow to move it
Really! We use serenity under wood. Or Howdens 4 in1 underlay. Or heatflow for ufh
That’s a shocker. I’m guessing the guy that whipped it also fitted it?
Thought that was a Cornish pasty at first
Karndean rigid clic or quickstep alpha are the best Clive we’ve used as they have a good locking system. Stay away from moduleo and quickstep...
Hard to tell from those pics but a good Sanding company will be able to tell you if it’s doable
If you wanna go straight onto that anhydrate you will have to use ridgid clic. Stick down won’t work. You will need to get a LvT fitter/company to...
Caulking up the seems. Quality
Goes up to 30 degrees so should be fine
Yes we would ply and stick to that. Shouldn’t need to pva join unless your subfloor is very unstable.
We’ve always glued down panaget. I find all the clic systems creak and move. 12mm is very thin for floating engineered wood.
Yep. Used cl all week for some quickstep lvt. It’s the best flowing bag and bottle by far. Better than some water based products. Ardex just seem...
Is it t and g that’s pva glued or clic without any adhesive?
Did you speak to Duncan?
Yes you can
Maybe he’s allowed to recut and bevel it all :rolleyes:
