That’s a complete failure, looks to me that someone whapped on the heating to full whack instead of over time it needs to be removed and done...
Excess sub-floor movement possibly, chipboard isn’t a suitable sub-floor for anything in my opinion it just isn’t stable enough. Click system...
You will absolutely need a surface dpm at minimum in an old cottage though, the likelihood of having a working mechanical dpm is very low, they...
Yeah it’s pretty rough, the underlay and gripper should always be changed and pu foam underlays aren’t ideal for woven backed carpets a crumb...
Full rip out and replace, don’t go with knight tile next time it’s pretty shocking quality too get him to remove the lot and give you money paid...
They need to replace the stairs also due to batch shading but your best option for an independent inspector would be sid bourne...
Definitely different batches, it’s a grey area really the store and yourself are both at fault as both should have checked the batch numbers...
I’m all for giving people the benefit of the doubt, sometimes accidents just happen but that is no accident that’s someone who shouldn’t be...
Grind the concrete smooth, ardex dpm 1c, prime with p4, ardex k11 then bond it down forget about battens. Sent from my iPhone using Tapatalk
You start at the door frames, you won’t get it in otherwise Sent from my iPhone using Tapatalk
It’s not effective for that use Sent from my iPhone using Tapatalk
Your best option is electric UFH, see warmup https://www.warmup.co.uk/underfloor-heating/electric Get a professional to install it you have no...
Sounds like some decent research, just make sure to check out the independent for reviews or ask to see their work and you should be good to go....
Rip it up, prep the floor again before fitting. Sent from my iPhone using Tapatalk
If it’s a T&G system it’s supposed to be mechanically fixed to the subfloor not floated. Sent from my iPhone using Tapatalk
Other option is Ardex use SD-T B to build up if over 10mm and K80 is the wear coat does the same job just check prices (we get the Ardex gear at a...
No, 800 has a higher compression strength Sent from my iPhone using Tapatalk
Stopgap 800 Sent from my iPhone using Tapatalk
Dry back is the traditional glue down LVT, and no both have to be like glass there’s no forgiveness for the click LVT it’s only for speed. Sent...
A dry back LVT would be better and both that and the click need the same prep work Sent from my iPhone using Tapatalk
