Screwfix do SPAX countersunk flooring screws that I've used for a customers full upstairs squeaky floorboards and worked a treat.
You want a decent wear coat screed. Tilemaster/kerakoll do budget screeds that are suitable for wearing surface. I've used level flex + on a...
It is more of a dirty trap with a lip like that yes. Van gogh is a nice tile, especially their herringbone in the van gogh. With the 2.5mm...
Pretty sure Spacey (an admin on here) used to bevel his strips sometimes. Not what I'd want to be doing but I'd always fit a 2.5mm with the van...
Not saying you supposed to but I've found they do have a slight lip when using a 3mm so swapped to 2.5mm
Micro bevelled, I use 2.5mm on these I usually do.
I'm out :rolleyes:
:D your over thinking it!! Wherever you start, work out the first cut and start with a full plank if you can and just go from there... The...
* leave minimum 25 - 30cm for staggers I meant
You could start from the opposite wall then work up to the breast if it makes it easier. Try and leave around 25-30cm staggers but don't do ever...
Makes no difference mate, you'll just have a couple of smaller fills then when your out the way of the breast, itll flow
You won't get even cut if you've got random walls lengths, will only work if its square. Stagger it, looks loads better but if you really want to...
Have a look on ebay, few sellers on there do a 6kg unit
Karndean universal & ke49
The good old days :D
Out the 2 I'd be on the invictus. I fit both and the expona is still nice to work with but the invictus would be my 1st choice.
Sounds like it could be a mixture of poor prep and late placement on the adhesive (adhesive allowed to dry out before fitting the plank onto it)...
What adhesive is it that was used? So the tile itself isn't sticky but when you push down you can hear it tack?
Always baffles me when a fitter can walk away singing he's done a great job when his cuts look like that!! He obviously has very low standards,...
Looks like I'm spamming now :D Flush them put Daz :cool:
