Ardex is well ahead of ultra floor for quality and consistency
Ardex na will be fine. If your subfloor reads below 90 rh you can use timbermate and tape the the joins. most underlays with a built in dpm will...
These systems have so many issues. Get a fully written spec from someone before you do anything. As you’ve already experienced that’s no straight...
Wakol have a perfect system for you. Ms330 then a leveller
Put a picture on and someone may be able to help. If your floor and walls are both soaking wet i think you should have a proper damp survey done...
Not acclimatised what a joke I would guess its poorly made. Could be moisture, could be heat. Could be lack of expansion. Could be a awful product...
Your better off sanding it and refinishing it surely ?
Cl not drying well ive found. May have to start using cl plus as standard. Cant go wrong with Na unless you under estimate the bags. Few extra on...
Welcome mate
J2 is a good compromise. Cheap and very hard wearing. Colonia is only good for bathrooms
It looks like you need another few thousand pounds worth of levelling compound
Id be surprised if your original floor met the standards. I’ve never seen a new build screeded floor thats within that tolerance. Its possible to...
Can you use one of the loose lay products?
Welcome
I dont even understand what you’ve written. is this a block and beam with a screed on top?
Test the floor. If its reading dry you could use a underlay with built in dpm. If there’s no mechanical dpm you should really put down a dpm1c...
Get a hygrometer on the floor and it will tell you if its damp in a few days
You will need to get a moisture reading from the old concrete and the timber floor before laying LVT over it. Its likely you will need a liquid...
It is possible. It depends on how well they prepared the subfloor and what type of adhesive was used. You wont know until you start to lift the...
How old is the part of the house where the bitumen is? If its before 70s then you wont have a dpm. The use of bitumen with your old floor covering...
