Your floor was never good enough for a hard floor. You should of been made aware of that or given the options before the work. Think you will have...
Also what is the builder accusing the floor layer of doing? It sounds to me like no floor would of survived in that area. So the builders work...
Whos faulty workmanship is it? It sounds like you’ve had a bad builder in and they havent done your drainage properly. This issue may not have...
Looks like a bad screed. We have alot of those. Needs digging up and re Doing correctly. Possibly able to take up the worse areas. Pour over a...
Would be cheaper to put dowm a dpm sheet and pour in a 45mm liquid screed. If you have the time to wait for drying and the height. Or na with...
Pressure sensative is naff. Small herringbone planks shouldn’t gap but the larger planks tend to
It sounds like it should of been ok. I wonder if the subfloor is in poor condition. A glue down floor over ring shanked 9mm ply shouldnt bounce...
They just need to pack the front of the step out with ply and fit the same way. The gap will then go
Better off getting a bottle of p51. Its the best primer around
Very risky installing a 2.5mm vinyl tile over this type of system. Think you will be better off with something more solid like engineered wood or...
When you say floating floor..do you mean a chipboard or caber floor floated on insulation? If so they are often poor and lacking a dpm. It sounds...
Tilemaster is good too
Cl plus
Im not sure thats the correct primer for that you’ve done. Usually it would be eco prim t for screed. I cant see prim grip being suitable for...
They’ve dropped the depth to keep the cost of the system down i would guess. Most customers are probably shocked when they find out how much...
It may be too thin but weve done coat systems Without the first coat blowing. I wouldnt trust instarmac. Its never worked properly when I’ve used...
Its ok for small areas 6mm ply on flat chipboard. Anything else is not good. Just get a small compressor or a longer hose
Why is the top red with primer? Did it blow when you turned the heating on?
I wonder if it’s bleeding through from the back?
Maybe a compatible tile adhesive and primer Or just primer and levelling compound
