nonslip welded to vinyl to make nosing in clean area, plus up walls and riser, about 5 years old so standing up well, little bit of burning on the weld i have just noticed.

This is not your work, Kimpton Flooring supplied and expertly installed the Vinyl on this staircase and well over 40,000 square metres to Walls, Floors and Ceilings when the BPL was being constructed during 1985 and 1986.

We constantly had over 20 skilled fitters on site and I personally installed and fitted these stairs - So how could you have possibly done the work?

For your information, The vinyl on the walls and ceilings was specially produced 2mm thick fire retardant Gerflor sheet with reduced fleck and with no surface coating.

See my profile album or visit our web page: http://www.kimptonflooring.co.uk/vinyl/vinyl.htm

What you are doing is pure Plagiarism and should not be expected from a senior member.

Please do NOT lie and steal praise for other peoples skilled workmanship - You will get found out!

An apology from you on this forum would not go amiss.

Steve Kimpton - Honest Flooring Contractor for well over 30 years.

Steve this is our work and i have been working at BPL for over 15 years doing all the repairs, and replaced your original staircase that you did, do you think it would still be the same since 1985/86
your firm did a fantastic job originally and i have been repairing and renewing your works where walls have been taking down, and new areas are done. i have no reason to lie, you are correct in saying it was a special gerfloor product made for the job, as you know its no longer available and we have replaced some of it with polyclad, i only posted these other pictures because you asked about more pictures, none of your work had Altro cut into the nosing. and the flooring on the stairs in not Gerfloor its Marley Vylon colour dolphin, you can tell this by the high graining, also our vinyl is laid the opposite way to yours.
you know of my company outside this forum Steve and know that we have skilled labour to do this work,
If i had stolen your work i would apology and hang my head in shame. i will check the pictures that i have posted and see if any could be yours as we have only replaced one of the two staircases on the site in the sterile suit, and if i have posted one of yours then i will indeed apologise,

Hi,

The sterile suite staircase without the Alto inserts is definitely our original work and you referred to it being installed by you about 5 years ago.

The vinyl work to the walls and ceilings on all the staircases are also our work and definitely not installed by you.

Sorry about the mix up on the Altro staircase as I was only meant to refer to the walls and ceilings on that one, because no way would we allow safety flooring with abrasive particles to be used in such areas due to the grit coming loose and causing contamination - Also we do not burn our welds.

Hi Steve
Yes you are correct and i have apologised about that, i didn't put these pictures up until you started asking questions about the staircase we did! I thought you were a potential client who wanted some done. and was showing you what could be done and i do have to replace that great staircase you did because its splitting on the nosing.
I have never said i did the walls and ceilings on the other staircase and if you had asked i would have said. and i didn't have any pictures of that part.

I only had one picture up of the staircase that we did until you started asking questions. the staircase that you had done to the biocald area had a plain PVC inset which had all spilt and everyone was slipping and falling down the stairs, thats why the client requested the nonslip.

I even pointed out the burnt weld, cheap shot, are you going to apologies to me now that you have admitted that you didn't do the staircase that we did.

Hi,

The fully clad sterile suite staircase is definitely our original work and you referred to it being installed by you about 9 years ago. There are no repairs or replacement parts by you to this area and it is still in very good condition, yet you still claimed it was your work?

The vinyl cladding to the walls and ceilings on all the staircases are also all our work and yes, you certainly did install the replacement flooring with Altro treads and the burnt welds.

I have already said Sorry about the mix up on the Altro staircase as I was only meant to refer to the walls and ceilings on that one, because I had simply copied and pasted the replies from the picture of our original staircase.

Anyway, All is now said and done.

Lol at this!