It seems hard to believe but clean regroove and use a lino weld similar to the colour !!! Done this in many commercial kitchens
Time consuming is having to cut around 144 holes where stage seating has to be refixed not quick at all !!!!!!!!! There's no quicker way than to...
agree with pigarse used uzin 222 in a hospital but went off similar to f60 time wise can be a bit messy though comes off with a rub. Solvent free...
Amtico make a pink in the vivid range had to install in a leisure centre café in 12x 12 tiles lovely
if the subfloor is damp can't you latex with a moisture tolerant product to get it smooth then use everlay/ rapidlay
If you have 12mm to play with 6 mm ply the wood side dpm/latex the concrete side install a new manhole (maybe howe green) raising it slightly then...
Using SX100 on a site at the moment get the mixes right and don't over water (like others on the same site) 5-5.5 ltrs and it comes up a treat...
When cutting in the template paper around the pan/pedestal makes sure you cut paper as you would vinyl(nice and tight) and then pencil onto vinyl...
totally agree sometimes the old ways are better and its much easier in my opinion to weld on the proper corner.As long as you leave a nice even...
Was looking after a job recently around 50 fitters all who are floorlayers and can do cove/cap but you would be surprised how many of them had...
couldn't type rewelded obviously !!!!!!!!!!!!!!!!
you can do a V as suggested or as i suspected you took out the weld made it a nice joint a reweled as should have happened in the first place.At...
Thats because people are scared out it i've always found 1lm at a time welds up like a treat or if there are 2 of you doing it can just keep going...
First post !! 6-6.5 on vinyl floors 5 on up the wall/lino/rubber 4 on lino up the wall
