Plywood Grades: When buying plywood at your local supplier, you may notice that there are a number of different grades. The normal grading system...
you just need the pdf bit i have posted up mate.
the one you have purchased is the same as my personal one (one of them anyway, but my original and favorite) :thumbs Had a look on ebay, jump...
dont need any extras mate
pain in the arse you mean ! lets say its a screed covered in old adhesive. You need to scrap back or shot blast etc. So much easier supplying...
yes mate. thats the correct calibration tool
you should be able to download the wood moister conversion table i would guess. And the calibration bit im sure you could purchase also. You...
yes. But it will now move twice as much in that direction. Hence i would advice not sticking at all and loose lay. The vinyl can move in all...
thats a long first post ! :D For start off, you say the screed cracked and epoxy was applied? to the whole area or was it applied to the...
Yes, 2 walls but as a 'L' shape. Not opposite walls.
Yes mate, Im in the process of interviewing a few trainers so we can provide the course direct.
Ye, PS will set but will take a while. I wouldn't glue to the top tho unless the vinyl your fitting is a darker colour to the one that is...
You shouldn't have to go back trim if it was installed correct in the first place. Fully sticking as you do is the safest way that you can cut...
lets get them pics of the damage as we guessing if we dont know where the damage is.
if cracks have appeared at the welds it is caused by the roll of vinyl being dropped on its end. (delivery driver etc unloading) It shatters the...
nothing wrong with 2nd hand providing it works. I think they come with a calibration pin that you put across the prongs to check its working...
are the cracks at the edges. So start at the weld and run maybe 1" into the main body of the vinyl?
they dont need calibrating. If they do then there is normally something that has gone wrong with it.
for what reason mate?
whats cracking mate? the vinyl or the screed blown? i wouldnt expect either after 1 week tho.
