Discussion in 'Subfloor Preparation' started by nevertrever2, Mar 26, 2014.
Has any one screeded over rolled out ps with out scraping as much up as possible and has it been ok?
Best off scraping it up than risking it !
It's a nightmare though
Be good to do a section as a test. Come on Matt try it out mate.
Probably have to much movement. Fibre reinforced might hold up for a while
NA or 1200 pro might work. Needs a good test though. Do you front room mate.
tested it daz, it failed. Its what softenable. Even Ardex will say there NA cant go over it.
Have you tested putting a fibre screed on ply joints scratch coat.
