After a previous post about plying a floor i have now decided to break out the old concrete and use slc to level,this will be going to the subfloor on a piece of dpm and over the asphalt,the piece that it coming out is about25/30mm thick so should this be done in two stages with the second going across the asphalt raising the floor by about 6=10mm at the front room threshold,Will be using Ball f46 to fix the vinyl planks and would prefer to use Ball products as you guys to rate them,so would the primer for the asphalt be p131?and would red bag be the one to use?it's about 1.5sm in all and the ruler is a 2 foot one for comparison and that is what is coming out,also have never used slc before although reading the forum it seems fairly straightforward but this is diy level not pro!picture attached as well with luck. Thanks.
use Ardex or Mapei products they are generally better, get the tech department to spec the job for you
