UFH on or off?

evening all,

appologies if this is a simple one for you,.....warm water piped underfloor heating:

- does it have to be switched off completely before starting prep or can it just be turned down low and remain on low during prep and fit?
- if it has to be switched off is it 48hrs before starting prep or 72hrs, remain off during fit and for 48/72hrs after completion then switched back on and increase 1 degree per day?

Fitting Moduleo Impress

thanks in advance

 

Then, some would say keep it on low throughout

 

Depend how cold you want your room. You turn the heating off in this weather and your room will be well below the temp required. We always leave the heating on low or you can get heater on the job


Sent from my iPhone using Tapatalk

 

when you say low what temp is that 10? 15deg?


Sent from my iPhone using Tapatalk

 

I would say as low as it can go without turning it off. I’ve found that most customers don’t really have accurate control over the ufh.


Sent from my iPhone using Tapatalk

 

thanks guys


Sent from my iPhone using Tapatalk

 

Getting some heaters in there before, during and after installation. Have warned the customer that if I can’t get the room up to temp I won’t be fitting


Sent from my iPhone using Tapatalk